If you are on board the Yeti® Rambler™ (or the various knockoff stainless steel tumblers with the same form factor) craze, I have a useful freebie for you today. When you are cutting vinyl lettering for one of the 30 oz models, use this template to curve the text so that it will be in a straight line when applied to the tumbler.
Download the 30 oz tumbler template in .studio3 format here.
Download the 30 oz tumbler template in .svg format for Cricut here.
You can see from the Silhouette Studio screen shot above that the instructions are on the mat, but basically you just double click and backspace over the sample text, type in your own, change the font and size, then recenter. Ungroup and regroup your text to move it from the curve or leave it on the curve to keep it editable. Delete (or set to No Cut) what you don’t need and cut.
I tried to make this template a no-brainer, but a basic knowledge of text on path is helpful for using it to the fullest. Here’s my video on the text to path if you need a refresher.
Text can’t be curved automatically in Cricut Design Space, so you will need to use the template as a visual aid as you place and rotate each letter manually. The SVG should import at the correct size, but I’ve included a 1.o inch square as reference so you can verify the size is correct after import (match it to the grid to check).
If you are looking for the template for the 16 oz double walled plastic tumbler you can find that here. And if you want to make your own templates for other size items, instructions for using an online generator are here.
Yeti® and Yeti® Rambler™ are trademarks of Yeti. Use of them does not imply any affiliation with or endorsement by them.